User Contributed                                           MET/CAL PROCEDURE
==============================================================================
INSTRUMENT:            HP 3400A
DATE:                  15-Nov-88
AUTHOR:                User Contributed
REVISION:              V 4.0
ADJUSTMENT THRESHOLD:  100%
NUMBER OF TESTS:       23
NUMBER OF LINES:       58
CONFIGURATION:         Fluke 5100B ()B
==============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4  CON
  1.001  ASK-                                                     F
  1.002  DISP         Ensure that the Test Instrument has Warmed Up.
  1.002  DISP         Switch the Test Instrument Power Off.
  1.003  DISP         Zero the meter movement using the center screw.
  1.004  DISP         Turn the Test Instrument on.
  1.005  HEAD         {Volts AC and Linearity Tests}
  1.006  DISP         Connect the BNC connector from the 7405A AC Divider
  1.006  DISP         to the Input of the Test Instrument.
  1.007  5100   0.001 0.001V         1/            400H                    2W
  2.001  5100   0.003 0.003V         1/            400H                    2W
  3.001  5100   0.01  0.01V          1/            400H                    2W
  4.001  DISP         Remove the 7405A AC Divider from the Input to the
  4.001  DISP         Test Instrument.
  4.002  DISP         Connect the 36" Coaxial Cable to the Test Instrument
  4.002  DISP         Input.
  4.002  DISP         Connect the 'BNC Female to Double Banana Adapter' to
  4.002  DISP         the other end of that coax cable.
  4.003  5100   0.03  0.03V          1/            400H                    2W
  5.001  5100   0.1   0.1V           1/            400H                    2W
  6.001  5100   0.3   0.3V           1/            400H                    2W
  7.001  5100   1     1V             1/            400H                    2W
  8.001  5100   3     3V             1/            400H                    2W
  9.001  5100   10    1V             1/            400H                    2W
 10.001  5100   10    5V             1/            400H                    2W
 11.001  5100   10    10V            1/            400H                    2W
 12.001  5100   30    30V            1/            400H                    2W
 13.001  5100   100   100V           1/            400H                    2W
 14.001  5100   300   300V           1/            400H                    2W
 15.001  HEAD         {Frequency Response Tests}
 15.002  DISP         Disconnect the coax cable from the Test Instrument.
 15.002  DISP         Connect the 50Ohm Feedthrough to that cable and
 15.002  DISP         reconnect it to the Test Instrument Input.
 15.003  DISP         Remove the connections from the Test Interface Panel.
 15.003  DISP
 15.003  DISP         Remove the 'BNC Female to Double Banana Adapter' from
 15.003  DISP         the coax cable attached to the Test Instrument.
 15.004  WIDE   0.3   0.3V           1/            400H                 N  2W
 15.005  MEMC   0.3   .3V            10/           400H_Reference
 16.001  WIDE   0.3   0.3V           5/            10H                  C  2W
 17.001  WIDE   0.3   0.3V           1/            50H                  C  2W
 18.001  WIDE   0.3   0.3V           1/            100KH                C  2W
 19.001  WIDE   0.3   0.3V           1/            1MH                  C  2W
 20.001  WIDE   0.3   0.3V           2/            2MH                  C  2W
 21.001  WIDE   0.3   0.3V           3/            3MH                  C  2W
 22.001  WIDE   0.3   0.3V           5/            10MH                 C  2W
 23.001  END